Venturi Tube Principle

flow element used to create a pressure change by accelerating a fluid stream is the venturi tube: a pipe purposefully narrowed to create a region of low pressure. As shown previously, venturi tubes are not the only structure capable of producing a flow-dependent pressure drop. You should keep this in mind as we proceed to derive equations relating… Read More »

IP – INGRESS PROTECTION

IP- Ingress protection classifies and rates the degree of protection provided against intrusion, dust, accidental contact, and water by mechanical casings and electrical enclosures. It followed by two or three digits. 1st Number  0 No special protection.                                              … Read More »

Servo Gauge Tank Level Measurement

Tank gauging system is based on the principle of displacement measurement. A small displacer is accurately positioned in the liquid medium using a servo motor. The displacer is suspended on a measuring wire that is wound onto a finely grooved drum housing within the instrument. The drum is driven via coupling magnets, which are completely separated by the drum housing.… Read More »

Leakage detectioon system for cooling tower

If water enters an oxygen lance from a leak in the cooling system, the results can be  catastrophic. Why take the risk, when simple means exist to avoid it. Endress+Hauser’s highly accurate leakage detection system, designed to IEC 61511 and EN ISO 13849-1, detects the slightest signs of a leak, so that action can be… Read More »